Zurn Wilkins 1/2" P1500 Calibrated Pressure Relief Valve
The Zurn Wilkins model P1500 Calibrated Pressure Relief Valve is designed for installation on cold water service lines as a means of protection against excessive pressure buildup. These devices are for pressure only and should be used in conjuncti
W12-P1500 - 1/2" model with adjustable spring range of 175-1225kpa.
W19-P1500 - 3/4" model with adjustable spring range of 175-1225kpa.
MacDonald NRS Flange Gate Valve 65-200mm
Our non-rising stem (NRS) gate valves are designed for installation on potable water lines, irrigation systems and water mains conncetions.
VV65NRS - 65mm NRS gate valve
VV80NRS - 80mm NRS gate valve
VV100NRSE - 100mm NRS gate valve
VV100NRSD - 100mm NRS gate valve, table D
VV150NRS - 150mm NRS gate valve
VV200NRS - 200mm NRS gate valve
VEE Wye Strainer
Our VEE Y strainers are a ductule iron body with full body epoxy (FBE) coated with nominal pressure of 2,000kPa, flanges to AS2129, temperatue range -20°C to 150°C, and flanges are available in table E as well as for 100mm in table D.
VV65Y - Zurn Wilkins expoxy coated 65mm wye strainer, table E
VV80Y - Zurn Wilkins expoxy coated 80mm wye strainer, table E
VV100Y - Zurn Wilkins expoxy coated 100mm wye strainer, table E
VV100YD - Zurn Wilkins expoxy coated 100mm wye strainer, table D
VV150Y - Zurn Wilkins expoxy coated 150mm wye strainer, table E
VV200Y - Zurn Wilkins expoxy coated 200mm wye strainer, table E
Zurn Wilkins Water Hammer Arrester
The Zurn water hammer arrester is ideal for use where Lead-Free* fittings are required. Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure.
W1260XL-A - 15mm Zurn water hammer arrester 159xØ22mm
W1260XL-B - 20mm Zurn water hammer arrester 184xØ22mm
W1260XL-C - 25mm Zurn water hammer arrester 159xØ28.6mm
W1260XL-D - 25mm Zurn water hammer arrester 184xØ44mm
W1260XL-E - 25mm Zurn water hammer arrester 159xØ64mm
W1260XL-F - 25mm Zurn water hammer arrester 184xØ73mm
MacDonald Electronic Timer Controlled Trap Primer
The MacDonald SV1/TP electronic timer controlled trap primer is designed to maintain a permanent trap seal in floor wastes.
SV1-TP - Standard model as shown.
SV1-TP-DZR - As above with a DZR solenoid
Solenoid Valve
The MacDonald solenoid valves are normally closed with pilot control. Used on products such as our Waterguard urinal sensor, Warden control systems, Trap Primer and many other products, these are available in 15, 20 and 25mm and in 240V or 24V AC
SV1/240 - Standard model 15mm 240V
SV2/240 - Standard model 20mm 240V
SV3/240 - Standard model 25mm 240V
SV1/24 - Standard model 15mm 24V
SV2/24 - Standard model 20mm 24V
SV3/24 - Standard model 25mm 24V
Wilkins Pressure Reducing Valve
The Wilkins Model ZW209 pressure reducing valve automatically reduces a higher inlet pressure to a steady lower downstream pressure regardless of changing flow rate and/or varying inlet pressure.
ZW209 - Standard model as shown.
ZW209BP - Same as ZW209 but with low flow bypass.
Wheelie Bins
MacDonald Industries has been a supplier of waste disposal products to New Zealand industry for nearly 40 years. MacDonald wheelie bins are available in 60, 80, 120, 140, 240, 660 and 1100 litre molded plastic MGB. For details on the available mod
MGB80 - Mobile wheelie bin 80L
MGB120 - Mobile wheelie bin 120L
MGB140 - Mobile wheelie bin 140L
MGB240 - Mobile wheelie bin 240L
MGB660 - Mobile wheelie bin 660L
MGB1100 - Mobile wheelie bin 1100L
Metal Access Hatch
Standard Metal Access Panels are supplied with the following features:
CO300BS - 300mm Budget Hatch With Stop-Bead Edge
CO300BF - 300mm Budget Hatch With Flange Edge
CO300CS - 300mm Customwood Hatch With Set-Bead Edge
CO300MF - 300mm Metal Hatch With Flange Edge
CO300MF-K - 300mm Metal Hatch With FlangeEdge and Keyed Lock
CO300MFD - 300mm Metal Hatch With FlangeEdge and Dust Proof Seal
CO300MFD-K - 300mm Metal Hatch With Flange Edge and Dust Proof Seal & Keyed Lock
CO300MS - 300mm Metal Hatch With Set-Bead Edge
CO300MS-K - 300mm Metal Hatch With Set-Bead Edge and Keyed Lock
CO300MSD - 300mm Metal Hatch With Set-Bead Edge and Dust Proof Seal
CO450BS - 450mm Budget Hatch With Stop-Bead Edge
CO450BF - 450mm Budget Hatch With Flange Edge
CO450CS - 450mm Customwood Hatch With Set-Bead Edge
CO450MS - 450mm Metal Hatch With Set-bead Edge
CO450MF - 450mm Metal Hatch With FlangeEdge
CO450MF-K - 450mm Metal Hatch With FlangeEdge and Keyed Lock
CO450MFD - 450mm Metal Hatch With FlangeEdge and Dust Proof Seal
CO450MFD-K - 450mm Metal Hatch With Flange Edge and Dust Proof Seal & Keyed Lock
CO450MS - 450mm Metal Hatch With Set-Bead Edge
CO450MS-K - 450mm Metal Hatch With Set-Bead Edge and Keyed Lock
CO450MSD - 450mm Metal Hatch With Set-Bead Edge and Dust Proof Seal
CO600BS - 600mm Budget Hatch With Stop-Bead Edge
CO600BF - 600mm Budget Hatch With Flange Edge
CO600CS - 600mm Customwood Hatch With Set-Bead Edge
CO600MF - 600mm Metal Hatch With Flange Edge
CO600MF-K - 600mm Metal Hatch With Flange Edge and Keyed Lock
CO600MFD - 600mm Metal Hatch With Flange Edge and Dust Proof Seal
CO600MS - 600mm Metal Hatch With Set-bead Edge
CO600MS-K - 600mm Metal Hatch With Set-Bead Edge and Keyed Lock
CO600MSD - 600mm Metal Hatch With Set-Bead Edge and Dust Proof Seal
Zurn Temp Guard 3 Shower Mixer
ZURN Z7300-SS-MT is a recessed mounted mechanical shower mixer with pressure balancing cartridge and solid control lever. Pressure balancing cartridge delivers nearly constant water temperature despite pressure fluctuations in either the hot or co
Z7300 - Standard model 9L/min - 2 star WELS rating.
