Delabie Sequential Mechanical Basin Mixer Spout L.200 DE2641 Delabie Sequential Mechanical Basin Mixer DE2641 Delabie Sequential Mechanical Basin Mixer Delabie Sequential Mechanical Basin Mixer Spout L.200Product Code: DE2641Product Enquiry test To prevent automated spam submissions leave this field empty. TabsOverviewWall-mounted sequential mechanical basin mixer with 70° turning range. Wall-mounted mixer with swivelling under spout L.200mm with hygienic BIOSAFE outlet. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed that the water flows through these tubes reduces the development of biofilm considerably. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. NOTE: Spout length from wall to outlet is L.263mm. Flow rate regulated at 5 lpm. Chrome-plated brass body. Hygiene control lever L. 200mm requires no manual contact. Mixer supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals. Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. ModelsDE2641 - Delabie Sequential Mechanical Basin MixerDE2641S - Same as DE2640 but with standard stop-cocks, not isolation types Downloads Installation Instructions DWG File - DE2641 DWG File - DE2641S RFA File - DE2641 RFA File - DE2641S