Zurn Exposed Single Flush Valve Z6000XL Z6000XL Zurn Exposed Single Flush ValveProduct Code: Z-6000XLProduct Enquiry test To prevent automated spam submissions leave this field empty. TabsOverviewZurn Z6000 is an exposed mounted, chrome plated toilet pan flushing valve designed to be installed directly above the toilet pan which it serves. Depending on the model of valve chosen, it may be connected to mains pressure water supply, or from a non potable supply tank. Deflecting the toggle lever delivers a metered 6L flush. Pipe sizing is essential to correct flush valve installation. All mains pressure flush valves require flow rates of 90L/min with a dynamic pressure of 150 - 500kPa. Where a non potable supply tank is used, pipe design should be completed by a suitably qualified person to ensure 90L/min flow rate is available, 25 - 100kPa (40mm isolator) 100 - 150kPa (25mm isolator) Also available in models to suit Belva and Stuart valve replacements. ModelsMAINS PRESSUREZ-6000XL - Standard c/p valve 6L flush. NON POTABLE Z-6000L-25 - Standard c/p valve with 25mm isolator.Z-6000L-40 - Standard c/p valve with 40mm isolator.Z-6000L-40LP - As above but with low pressure diaphram kit.Z-6000L-BV - Standard Belva replacement valve with metal push button on front.Z-6000L-BV-H - Standard Belva replacement valve with toggle on side.Z-6000L-BD - Standard Belva Deluxe replacement valve with metal push button on front.Z-6000L-BD-H - Standard Belva Deluxe replacement valve with toggle on side.Z-6000L-ST - Standard Stuart replacement valve with metal push button on front.Z-6000L-ST-H - Standard Stuart replacement valve with toggle on side. NOTE: Belva and Stuart replacements are not supplied with isolating valves, they are machined to be a direct replacement of the valve being removed. Downloads Tech Data - Z-6000XL Tech Data - Z-6000L Tech Data - Z-6000L-BV Installation Instructions - Z-6000L Installation Instructions - Z-6000XL Spare Parts
