MacDonald Security Access Panels
MS-AP heavy duty access panels are designed to give general access to inwall mounted valves plus, more specifically, recess mounted ZURN single flush, flushing valves where a heavier duty panel is preferred over the standard ZA access panel.
Panel fabricated in 2.0mm Type 304 stainless steel with a No 4 brushed finish and radiused edge. Standard size 345 x 345 but also available as -SP 345 x 450 where greater access is required.
MacDonald Security Access Panels
MacDonald Security MS-AP heavy duty access panels are designed to give general access to inwall mounted valves plus, more specifically, recess mounted ZURN single flush, flushing valves where a heavier duty panel is preferred over the standard ZA access panel. These access panels are also used to allow fitting of fixtures where products are being fitted from the front of wall where there is no service duct. These panels also give access for service people for future maintenance.
Warden WA4 Plumbing Control System
Warden is a multi purpose electronic control system for ensuring ultimate security and economy of plumbing fixtures. This coupled with our plumbing fixtures gives you a complete solution to every high security application (see stainless steel sanitaryware for fixtures).
Warden WA4 uses piezo electric switches to activate low voltage industry standard solenoid valves on plumbing fixtures. Warden WA4 is mostly used for multi shower applications where the client is looking to provide limitations on shower run times, with lock out periods after use, such as;
MacDonald Universal Trap
The MacDonald Universal Trap is designed for urinals with a rear or downward outlet with volumes of between 2 - 4 L/min flow. The trap has a Ø50mm inlet that connects to the fixture outelt and a Ø50mm outlet that connects to a 50mm waste pipe socket. Comes with a plug for easy cleaning. This trap can also be used for wash basins where an inwall solution is required.
KWC DVS High Security Basin
KWC DVS DV-VR01-081 is a high security washbasin designed and tested to be vandal-proof and avoid ligature points wherever possible. This model a no tap hole variant and is suited to combine with a MacDonald Security washbasin control set available in electronic or mechanical.
Watts Eurotherm Thermostatic Mixing Valve
Watts Eurotherm TRL117 is a thermostatic mixing valve designed to supply sinks and washbasins with tempered water not exceeding the set temperature (up to 5 washbasins depending on tap flow rate). This mixer is ideal for schools, restaurants, laboratories,, offices, correctional, etc...anywhere needing a supply of water at a pre-set temperature on site. Hot water supply cut totally and immediately is cold water supply is interupted.
PROTECTION AGAINST LEGIONELLA
KWC DVS High Security Shower Head
The DV-SH07-040 is a wall mounted 30˚ angled high security shower head with 4 rings. Substantially reduced ligature risk with a tamper proof security locking plate. This shower head is intended for installations where everything except the showerhead and control are concealed behind a wall or panel.
Brushed 316 stainless steel, with invisible anti-rotating pin. Inlet connection M1/2” BSP thread.
This shower head can be used in conjunction with any of MacDonald shower controllers including Warden electronic, MacDonald Security, or Delabie time delay products.
Solo Electronic Dual Flush Valve
MacDonald SOLO-DFXL is a recess mounted dual flush mains pressure flush valve designed to connect to WC pans that are 6/3L capable. This will enable a 3 Star WELS rating for the WC. SOLO-DFXL is a plumber only installed, low voltage electronic controller capable of fitting within a minimum 94mm wall cavity. The valve is supplied with a 450 x 325 access panel to which 2 x touch sensitive piezo switches are mounted. Concealed fixing for the panel allows for a secure and unobtrusive cover plate.
Zurn Inline Vacuum Breaker
The Zurn Z7000-VB inline vacuum breaker is designed for use in the shower where a shower hose is fitted to prevent the backflow of water. Inlet and outlet are 1/2". The female connection attaches to the water supply fixed wall elbow and the shower hose connects to the male outlet. Arrow on vacuum breaker should point in the direction of the water flow. The body is manufactured in brass with hard chrome finish.
ASI Recessed Soap Holder
ASI Recessed Soap Dish manufactured from 16 gauge type 304 stainless steel with satin finish. One piece drawn construction with beveled trim and embossments for air circulation and drainage. Unit has two “T” nuts welded on back for rear mounting.
