KWC Franke Stainless Steel Floor Mounted P or S Trap Toilet Pan
KWC FRANKE FRFM4 is a floor mounted stainless steel P trap toilet pan with side access panels. It is fully shrouded with anti-ligature flushing rim with sufficient room inside the shroud to enable it to be converted to an S Trap if preferred.
The top fascia plate is convexed to prevent pooling of liquid. Seat or seat pads can be supplied but can only be fitted at time of ordering.
For flushing options, please refer to the Zurn flush valves, Warden control system or Wisa inwall cistern.
Warning: Do not use dimensions for set out purposes.
KWC Heavy Duty Stainless Steel Wall Mounted Toilet Pan
KWC HEAVY-DUTY Wall hung WC pan, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, type 304 stainless steel, surface satin finished, material thickness 1,5 mm, flushing certificated to EN 997, concealed flushing rim with min. 4 liter flushing capacity, with a shrouded 100 mm diameter horizontal 'P' trap outlet, pressed seat area tapered towards centre, all edges curved, fixing with 280 mm stainless steel rods and screw nuts (included) through the wall. 4 litre flush EN 997 approved.
Dimensions 360 x 351 x 500 mm (W x H x D)
KWC Heavy Duty Stainless Steel Floor Mounted Toilet Pan
KWC Heavy-Duty floor standing WC pan for fitting through duct wall, manufactured from type 304 stainless steel, material thickness 1,5 mm for the pan and shroud - satin polish finish. The WC incorporates a stainless steel P trap 102 mm o/d. A separate mounting plate and 4 bolts are provided for mounting the WC through a duct wall. The Campus WC has a pressed seating area that does not require a separate seat in vandal prone installations. However, a seat and lid can be fitted. Approval: Complies with BS EN 997 for 4.5 litre flushing.
Franke Stainless Steel Medium Duty Security Wash Basin
The Franke ANMX452 is a satin finish Type 304 stainless steel basin.
The ANMX452 has a deep bowl with a 32mm waste. Trap is not supplied. Basin is not pre-punched for taps but can be on special request.
The basin is designed to be face wall mounted with a removable shroud allowing access to fixing and waste and water fittings. The shroud is securely fastened to the basin and wall using a concealed Allen screw fixing.
It is suitable for use in vandal prone areas such as public toilets, schools, courthouses, prisons, and police stations.
Franke Stainless Steel Guardian Wash Basin
The Franke HDTX450 is a satin finish Type 304 stainless steel basin. It is of one piece, seamless construction and is suitable for use in vandal prone areas such as public toilets and schools.
• It has a deep bowl with a 32mm waste.
Note: Basin is not pre-punched for taps but can be on special request.
• The basin is designed to be bolted through the wall where a plumbing duct exists.
KWC Stainless Steel Oval-A Washbasin
KWC Oval-A washbasin is a wall-mounted washbasin made from Type 304 stainless steel, suitable for use in vandal prone areas such as public toilets, schools, stadiums, and all other public bathrooms. The Oval-A has a clean and simple design, internal dimensions 279D x 363W mm, 1.2mm thick with satin stainless steel finish, is supplied with no taphole but a taphole can be put in either the left or right side tap ledge, accepts a 40mm waste (not included), and is without overflow.
KWC Stainless Steel Knee Operated Wash Basin
KWC ANIMA washbasin with knee actuation is manufactured from type 304 stainless steel-satin polish finish, material thickness 0.9 mm. Supplied complete with water spout positioned in rearright hand corner and 32 mm waste outlet. Note: The pre-mixing valve and the pipework linking the water spout to the knee operated front panel is all supplied with the washbasin.
Wall mounted by fitting a top joggle strip under the upstand return and by screw fixing through the integral rear brackets. Screws and plugs are not supplied.
Franke Planox Stainless Steel Washtrough - without tap ledge
Franke high quality wash troughs are ideally suited for installation in industrial workshops, sports facilities, school bathrooms and early childhood education facilities. The new Franke PLANOX range offers a functional, easy-to-clean and user-friendly solution whilst ensuring optimum hygiene. PLANOX washtroughs are seamlessly welded from the inside, making them highly resistant to dirt and bacteria build up.
MacDonald Security Drinking Fountain
MacDonald MS-DF is a vandal resistant wall mounted drinking fountain designed to be installed outside where spilled water can fall to ground.
Pressing the valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a 2L/min flow restrictor to ensure a uniform flow rate.
Delabie Wall Mounted Twin Hole Mixer - 45lpm
DELABIE DE5647T2 is a wall mounted twin hole mixer for commercial kitchens with swivelling tubular over-spout. Rapid fill flow rate 45L/min at 300kPa. Chrome plated brass body and spout, shock resistant ball levers for withstanding intensive use. Spout H.180mm L.200mm with smooth interior for reduced bacterial development and star shaped flow straightener. Also available with H180mm L.300mm spout. Operating pressure 100-500kPa, 300 kPa recommended. M1/2” offset connectors supplied with Ø70mm wall plate.
