ASI Stainless Steel Inter-Lok Framed Mirror
The ASI 0600 series mirror has a stainless steel inter-lok angle frame with either standard plate glass or tempered glass options. The 19x16mm frame is roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. The frame is formed seamless with mitred corners, welded, polished and have gently radiused edges to provide added strength and an appealing aesthetic. Mirror edges are protected with friction and chafe absorbing fillers.
ASI Surface Mounted Waste Bin
ASI AS0828 Surface Mounted Waste Bin holds 25L of paper waste. Stainless steel with satin finish. Vertical front edges rounded to 13mm radius, no exposed fastening devices or spot welded seams, hemmed top lip for user safety. Four interior hooks for hanging a disposable bag (supplied by others).
Screw-mounted to wall through keyhole slots on the back of unit. Theft resistant after installation of concealed locking screw.
KWC DVS High Security Basin
KWC DVS DV-VR01-081 is a high security washbasin designed and tested to be vandal-proof and avoid ligature points wherever possible. This model a no tap hole variant and is suited to combine with a MacDonald Security washbasin control set available in electronic or mechanical.
Watts Eurotherm Thermostatic Mixing Valve
Watts Eurotherm TRL117 is a thermostatic mixing valve designed to supply sinks and washbasins with tempered water not exceeding the set temperature (up to 5 washbasins depending on tap flow rate). This mixer is ideal for schools, restaurants, laboratories,, offices, correctional, etc...anywhere needing a supply of water at a pre-set temperature on site. Hot water supply cut totally and immediately is cold water supply is interupted.
PROTECTION AGAINST LEGIONELLA
ASI Roval Semi-Recessed Mounted Double Toilet Roll Dispenser
Roval AS20031 is a semi-recessed mounted twin roll, toilet paper dispenser. The dispenser has a formed seamless, bowed front face with gently radiused edges to provide added strength and complimentary appearance. Fabricated in 0.9mm type 304 satin finish stainless steel. All exposed surfaces are protected with PVC film which is easily removed after installation. Includes semi-recessed flange for unit.
KWC DVS High Security Shower Head
The DV-SH07-040 is a wall mounted 30˚ angled high security shower head with 4 rings. Substantially reduced ligature risk with a tamper proof security locking plate. This shower head is intended for installations where everything except the showerhead and control are concealed behind a wall or panel.
Brushed 316 stainless steel, with invisible anti-rotating pin. Inlet connection M1/2” BSP thread.
This shower head can be used in conjunction with any of MacDonald shower controllers including Warden electronic, MacDonald Security, or Delabie time delay products.
MacDonald Bariatric Folding Shower Seat
The MacDonald bariatric folding shower seat is made for bariatric patients and comes with Satin Stainless Steel mounting and legs. The white acrylic seat features white-slotted, slip resistant decking with rounded edges. This bariatric shower seat will take a static load rating of 350kg, as opposed to the standard shower seat. When not in use this shower seat will fold up against the wall.
Dimensions: 960 x 400 x 475 mm (L x W x H)
Note that this does not comply with the NZS4121 for accessible bathrooms due to the size requirements of 800x450mm.
Solo Electronic Dual Flush Valve
MacDonald SOLO-DFXL is a recess mounted dual flush mains pressure flush valve designed to connect to WC pans that are 6/3L capable. This will enable a 3 Star WELS rating for the WC. SOLO-DFXL is a plumber only installed, low voltage electronic controller capable of fitting within a minimum 94mm wall cavity. The valve is supplied with a 450 x 325 access panel to which 2 x touch sensitive piezo switches are mounted. Concealed fixing for the panel allows for a secure and unobtrusive cover plate.
Franke Stratos Paper Towel Dispenser
Franke Stratos Paper Towel Dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
1x AVAILABLE
Franke Stratos Paper Towel Dispenser
Paper towel dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
