Jrgumat Thermoblending Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgutherm Flow Regulating Valve
The JRG 6320 valves are used in loop design applications where there is a number of "sub-loops" that require balancing in order to ensure even temperature throughout.
The 6320 thermo-regulating valve are normally positioned at the end of each sub-loop and will allow water to circulate through that sub-loop until the desired temperature is reached. At that point it will slowly close allowing hot water to pass to other sub-loops, thus maintaining a balance across the whole system.
Delabie Recessed Thermostatic Sequential Shower Mixer
DUE FOR RELEASE OCTOBER 2024
Delabie Straight Shower Curtain Track Set
The Delabie straight shower curtain is a kitset that includes the track, curtain and hooks to hold the curtain to the track. This kitset is 1000mm in Ø20mm stainless steel tube for strength and durability. It comes complete with one PVC shower curtains 1800mm in height and stainless steel curtain hooks.
ASI Double Robe Hook
ASI AS7312 is a double robe hook with two hooks set apart at 90° on center, extend 60mm from the wall or door. Suitable for robes, clothing, or small bags. Satin finish. High function, classic styling.
ASI Heavy Duty Utility Hook
ASI AS1306 heavy duty clothes, robe and towel hook is made from Type 304 satin finish stainless steel. Designed for surface mounting for general use.
ASI Single Robe Hook
ASI AS7308 is a single robe hook extends 59mm from the wall or door. Suitable for robes, clothing, or small bags. Satin finish. Minimalistic, rugged and elegant.
ASI Frameless Stainless Steel Mirror
AS8026 mirrors are fabricated from 1mm Type 304 stainless steel with a #8 mirror finish. The mirror has a 6mm thick Masonite waterproof tempered back board for strength and the stainless steel mirror is returned 8mm all around the backing board. The mirror has 4 x 5.5mm mounting holes ( 6 x holes on 610 x 910 size).
NOTE: The 8026 does not have the same reflective quality as glazed versions such as Model 20650 and some limited distortion is likely in very large sizes.
ASI Roval Glass Mirror
Roval mirror frames are fabricated from 1.2mm Type 304 stainless steel and are brush finished. The frame is formed seamless with mitred corners, welded, polished and have gently radiused edges to provide added strength and an appealing aesthetic. Mirror edges are protected with friction and chafe absorbing fillers.
MacDonald Stainless Steel Automatic Hot Hand Dryer
The Eco Dry 2000ST hand drier is a fully automatic sensor activated drier suitable for installation in any commercial application.
With a low noise output and high delivery fan, Eco Dry 2000ST will dry hands in approximately 30 seconds. It has a robust brush finish stainless steel cover which will withstand normal rigours of a commercial washroom.