Wheelie Bins
MacDonald Industries has been a supplier of waste disposal products to New Zealand industry for nearly 40 years. MacDonald wheelie bins are available in 60, 80, 120, 140, 240, 660 and 1100 litre molded plastic MGB. For details on the available models & sizes of our wheelie bins, please refer the data sheets attached. Refer to our sales office for best prices and availability.
Delabie Premix Compact Thermostatic Mixing Valve
Delabie Premix Compact thermostatic mixing valve for mixed water distribution from 30 - 60°C: Suitable for 2 to 7 sanitary points-of-use (depending on the flow rate). Anti-scalding safety: immediate shut-off if cold or hot water supply fails. Adjustable temperature from 30 - 60°C, can be blocked by the installer. Brass body. Filters and non-return valves. Recommended flow rate range: from 5 - 20 lpm. Thermal shocks are possible. M½" connections with 40mm centres.
Delabie Premix 'Nano' Thermostatic Mixing Valve
The Delabie ‘Nano’ thermostatic mixing valve is for control of mixed water distribution for 1 to 2 taps or 1 shower.
Temperature pre-set at 38°C, adjustable from 34 - 60°C. Anti-scalding safety between 34 - 42°C and automatic shut-off if cold or hot water supply fails. Minimum operating flow rate is 3L/min.
Supplied with integrated non-return valves and filters. Thermal shocks are possible without removing the valve.
Delabie Premix Comfort Thermostatic Mixing Valve
Delabie Premix Comfort is a group thermostatic mixing valve for mixed water distribution from 32° - 42°C giving anti-scalding safety. The valves regulate temperature variations and are supplied with filters and non-return valves that can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob).
OPERATION AND APPLICATIONS
Jrgumat Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgumat Thermoblending Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgutherm Flow Regulating Valve
The JRG 6320 valves are used in loop design applications where there is a number of "sub-loops" that require balancing in order to ensure even temperature throughout.
The 6320 thermo-regulating valve are normally positioned at the end of each sub-loop and will allow water to circulate through that sub-loop until the desired temperature is reached. At that point it will slowly close allowing hot water to pass to other sub-loops, thus maintaining a balance across the whole system.
ASI Recess Mounted Soap Holder
The ASI recess mounted soap holder designed for wet or dry wall installations. It is manufactured seamless of one-piece 22 gauge stainless steel Type 304 stainless steel with satin or bright finish. It has a raised lip which prevents the soap from slipping out of the holder.
Zurn Recess Mounted Sluice Sink Flush Valve
Zurn Model ZH-6152XL-SL flush valve is a hydraulically actuated mains pressure sluice sink flushing valve with an approved vacuum breaker allowing direct connection to potable water supply without any additional backflow protection. The standard valve is pre-set to deliver a 6L flush and has acheived the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.
Zurn Exposed Mounted Sluice Sink Flush Valve
Zurn Model Z-6000XL-SL flush valve is a manually operated sluice sink flushing valve with toggle handle actuation with an approved vacuum breaker allowing direct connection to potable water supply without any additional backflow protection. The standard valve is pre-set to deliver a 6L flush and has achieved the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.
Pipework design is critical to correct valve operation and must be completed by a suitably qualified person.
